Epson Stylus Photo - Page 138

Printing starts too high or too low on the page.
Cause What to do
Margins are set incorrectly in
your application.
Check that the margins are set
correctly in your program. See the
printable area specifications on page
B-5 in Appendix B.
The size of the paper loaded
in the printer does not match
the paper size setting within
your application program or
printer driver.
Load the correct size of paper, or
change the paper size settings within
your application program or printer
driver to match the size of paper you
are using.
Print speed is not what you expect.
Cause What to do
The image resolution and the
amount of color used in the
document may be too high.
Carefully considering your use of color
and resolution can help you optimize
your printing times. For more details,
see ‘‘Increasing the Print Speed’’ on
page 8-25.
Note:
High resolution printing and color
printing significantly increase the amount
of data to be processed. These two factors
have the greatest effect on print speed.
L
EPSON Stylus Photo
User’s Guide
A5 size Chapter 8
12-28-96
8-12 Troubleshooting