Epson Stylus Photo - Page 154

4. When the P power light stops flashing, click Print nozzle
check pattern in the Head Cleaning dialog box and use
the pattern to confirm that the head is clean and to reset the
cleaning cycle.
Nozzle check pattern:
The above sample is in black and white, but the actual check pattern
prints in color.
In the check pattern, if you find that any segments are missing
from the test lines, you may need to repeat the head cleaning
and print the nozzle check pattern again.
If print quality hasn’t improved after repeating this procedure
four or five times, follow the recommendations listed in this
chapter. If the print quality still has not improved, contact your
dealer.
For Macintosh users:
1. Make sure that the printer is on, and the B and A ink out
lights are off.
2. Choose Utility from the Print dialog box. Then click the Head
Cleaning button.
3. Follow the on-screen messages.
L
EPSON Stylus Photo
User’s Guide
A5 size Chapter 8
12-28-96
8-28 Troubleshooting