4. Click the Details tab. The following window appears:
5. Click the Add Port button, then specify the network path to
the printer. Click OK.
6. After you have made your settings on the Details menu, click
Start, point to Programs and Epson, then click Spool
Manager4. The Spool Manager window opens.
7. Select your printer, click the Queue menu, then click Setup.
The Queue setup window opens.
8. Make sure the Use Print Manager for this port option is on;
it is on if the box contains a check mark. Then click OK.
Now you can use your printer on a network.
dr-1
2
R
EPSON Stylus Photo
User’s Guide
A5 size Chapter 2
12-28-96
Getting Started 2-17
To Next Page
Loading...
