144
Setting Options Description
Change Paper Type/Paper
Size
Paper Type Select a paper category and paper type.
Paper Size Select a paper size or select User-Defined if
your desired size is not listed.
Advanced Paper Settings menu (in the Poster Board menu)
Setting Options Description
Paper Thickness 0.01 to 1.50 mm or
0.4 to 59.1 mil
Sets the thickness of the paper; displayed for
custom paper settings.
Note: Load poster board that is 0.031 to 0.059
inch (0.8 to 1.50 mm) thick and set the paper
thickness accordingly.
Paper Suction –4 to +4 Select to adjust the printer's suction setting;
choose lower values for thinner papers.
Drying Time Drying Time per Pass
Drying Time per Page
Set the amount of time the printer pauses to
allow drying after each pass or each printed
page.
Paper Size Check On
Off
Select On to detect the paper width when
paper is loaded.
Select Off if a paper setting error occurs when
paper is correctly loaded.
Paper Feed Offset –0.70 to +0.70% Select the amount of offset necessary to
reduce banding on uneven color in printouts;
displayed when using a custom paper type.
Paper Feed
Offset(Bottom)
–0.70 to +0.70% Adjust this setting if banding or uneven colors
appear on the bottom edge (0.59 inches [15
mm]) of the paper.
Restore Default Settings — Restores advanced media settings to their
default values; not available with custom
paper types.
Caution: If the Paper Size Check setting is set to Off, the printer may print beyond the edges of the
paper, causing ink to get on the printer.
To Next Page
Loading...
