24
Parent topic: Using the Control Panel
Using Power Saving Settings
Your product enters sleep mode automatically and turns off the LCD screen if it is not used for a period
of time. You can make the time period shorter and select other options to save energy and resources.
Changing the Sleep Timer Settings
Changing the Power Off Timer Settings
Parent topic: Introduction to Your Printer
Changing the Sleep Timer Settings
You can adjust the time period before your product enters sleep mode and turns off the LCD screen.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Select the Menu icon.
3. Select General Settings > Basic Settings > Sleep Timer.
4. Do one of the following:
• Press the + or – button to increase or decrease the number of minutes.
• Press the number to display the on-screen keypad, select the number of minutes (between 1 and
60), and select OK.
Note: The default setting is 4 minutes.
5. Select OK.
When your product enters sleep mode, the control panel's screen goes dark, but the power light
remains on.
Parent topic: Using Power Saving Settings
Changing the Power Off Timer Settings
You can have the product turn off automatically if it is not used for a specified period of time.
To Next Page
Loading...
