23
• Certain Maintenance Settings
• System Administration settings
• Web Config settings
• EpsonNet Config settings
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance. For more information on administration settings, see the online
Administrator's Guide.
1. Press the home button, if necessary.
2. Select the Menu icon.
3. Select General Settings > System Administration > Security Settings > Admin Settings.
4. Select Admin Password > Change.
5. Do one of the following:
• If you have set an administrator password before, enter the current password, then enter and
confirm the new password in the fields provided.
• If you have not set an administrator password before, enter the default password in the current
password field, then enter a new password and confirm it in the fields provided.
Note: The default password is the product's serial number. Check the label on the back of the printer
to locate the serial number. The default user name is blank.
6. Select OK.
7. Select Lock Setting > On to lock settings.
A prompt appears confirming that you want to enable locked settings. Select Yes to enable the
setting and return to the home screen.
The lock setting icon is displayed on the home screen when the lock setting is enabled.
You must enter the admin password to access any of the locked settings.
Note: You can restore the administrator password to the default password by selecting Restore Default
Settings on the Admin Password screen and entering the administrator password. If you forget your
password, contact Epson for assistance.
To Next Page
Loading...
