155
Related tasks
Setting a Password and Locking the Control Panel
Maintenance Menu
Select the maintenance icon or Menu > Maintenance to run nozzle checks, cleaning cycles, and
other maintenance operations.
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Setting Description
Print Head Nozzle Check Prints a nozzle check pattern so you can check for clogged
nozzles
Head Cleaning Perform if the nozzle check pattern has faint or missing areas
Power Cleaning Perform if the nozzle check pattern still has faint or missing
areas after performing a head cleaning three times in a row
Replace Ink Cartridge Displays the amount of ink remaining and the model number
for the ink cartridge
Replace Maintenance Box Displays the amount of free space remaining and the model
number of the selected maintenance box
Select How To... to view the replacement procedure on the
LCD screen.
Adjust Cut Position Adjust the position of the cutter between -3.0 to 3.0 mm
Capping Station/Wiper Cleaning Select to try and clean clogged nozzles if you have performed
Power Cleaning and the nozzles still appear clogged.
Select How To... to view the cleaning procedure on the LCD
screen.
Paper Guide Cleaning Perform if there is dirt or ink on your prints or when the paper
does not feed properly
Parent topic: Using the Control Panel Menus
Related concepts
Print Head Maintenance
To Next Page
Loading...
