52
5. Insert the black paper stop onto the spindle and press in until there is no gap between the paper stop
and the roll paper.
Parent topic: Roll Paper Handling
Installing the Borderless Spacer
When you perform borderless printing on roll paper with the following widths, you may need to install the
borderless spacer:
• A2 (16.5 in. [420 mm])
• US B (11 in. [279.4 mm])
• 8 in. (203.2 mm)
Note: Only 2-inch core media is supported when using the borderless spacer.
1. Remove the black paper stop from the spindle.
To Next Page
Loading...
