146
Setting Options Description
Platen Gap Auto
0.9
1.2
1.5
2.1
2.6
Select the distance between the print head
and the paper; displayed only when using a
custom paper type.
Paper Suction –4 to +4 Select to adjust the printer's suction setting;
choose lower values for thinner papers.
Drying Time Drying Time per Pass
Drying Time per Page
Set the amount of time the printer pauses to
allow drying after each pass or each printed
page.
Paper Size Check On
Off
Select On to detect the paper width when
paper is loaded.
Select Off if a paper setting error occurs when
paper is correctly loaded.
Paper Eject Roller Auto
Use (Heavy Load)
Use (Light Load)
Do Not Use
Select to control the paper ejection roller;
select Auto to use the roller automatically
depending on the type of Epson paper.
Select a Use option to always use the roller to
eject paper.
Select Do Not Use when you are concerned
about damaging the print surface.
Paper Feed Offset –0.70 to +0.70% Select the amount of offset necessary to
reduce banding on uneven color in printouts;
displayed when using a custom paper type.
Paper Feed
Offset(Bottom)
–0.70 to +0.70% Adjust this setting if banding or uneven colors
appear on the bottom edge (0.59 inches [15
mm]) of the paper.
Restore Default Settings — Restores advanced media settings to their
default values; not available with custom
paper types.
To Next Page
Loading...
