149
Setting Options Description
Paper Source Settings Various options See the Paper Source Settings table below
Custom Paper Setting 1 to 30 See the Custom Paper Setting table below
Print Nozzle Check Pattern
During Print
Every Pages
Off
Sets whether to print a nozzle check pattern
before the printer prints each page
Paper Source Settings
Setting Options Description
Roll Paper Setup Auto Loading Automatically feeds roll paper into the printer
Cut Settings
Auto Cut Automatically cuts the roll paper after printing
Print Cutting Guideline Select On to print cut lines on roll paper (if
Auto Cut is turned off)
Cut for Borderless Print Select Two Cuts to insert a margin and cut
twice between pages, or One Cut to cut once
between pages
Quick Cut Select On to cut once between pages while
the next page is still printing
Margin Refresh Select On to automatically remove ink stains
from a previous borderless print by trimming
the leading edge of the paper
Error Notice Paper Size Notice
Paper Type Notice
Detect Paper Skew
Select On to display an error message when
the output size or paper type settings differ
between the driver and printer, or if the paper
is skewed
Platen Gap Offset Narrow
Standard
Wide
Wider
Widest
Adjusts the distance between the print head
and the paper
Note: The Platen Gap Offset setting cannot
be set wider or narrower than the value set for
Platen Gap.
To Next Page
Loading...
