151
Setting Options Description
Paper Suction –4 to +4 Adjusts the printer's suction setting for the
selected source; choose lower values for
thinner papers
Back Tension Standard
High
Extra High
Select to adjust the paper feeding tension;
choose High or Extra High if paper wrinkles
during printing
Drying Time Drying Time per Pass
Drying Time per Page
Set the amount of time the printer pauses to
allow drying after each pass or each printed
page
Paper Size Check On
Off
Select On to detect the paper width when
paper is loaded
Select Off if a paper setting error occurs when
paper is correctly loaded
Note: If this setting is set to Off, the printer
may print beyond the edges of the paper,
causing ink to get on the printer.
Auto Cut Follow Paper Source
Settings
Never Cut
Select Follow Paper Source Settings to
automatically cut roll paper after each page is
printed depending on the paper source
settings
Select Never Cut to cut paper manually
Skew Reduction On
Off
Select Off if the front edge of thin or softer
paper folds
Roll Core Diameter 2inch
3inch
Set the paper core size for the loaded roll
paper
Paper Eject Roller Auto
Use(Heavy Load)
Use(Light Load)
Do Not Use
Presses down on paper as it is ejected
Select a Use option if the print head strikes
the paper. If you are printing on glossy paper,
select Do Not Use to avoid damaging the
paper surface.
To Next Page
Loading...
