181
1. Load roll or cut sheet paper in the printer.
2. Make sure the correct paper type is selected.
3. Do one of the following:
• Windows 11: On the right side of the Windows taskbar, click the up arrow, click the icon, and
then click on your product.
• Windows (other versions): Access the Windows Desktop and right-click the icon for your
product in the right side of the Windows taskbar, or click the up arrow and right-click , select
Properties or Printing preferences, and click on the Utility tab.
• In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or
Printers & Scanners, select your product, and select Options & Supplies. Select Utility and
select Open Printer Utility.
4. Select Print Head Cleaning.
5. Select Power Cleaning and then click Next.
A confirmation message appears.
6. Read the message, select the checkbox, and click Next.
7. Click Start to begin the cleaning cycle.
Note: Power Cleaning takes about 5 minutes.
The power light begins flashing. When the cleaning cycle is finished, the power light stops flashing
and a confirmation screen appears.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
8. Click Print Head Nozzle Check.
9. Click OK.
The nozzle pattern prints.
To Next Page
Loading...
