200
7. Have two people lift the printer by placing their hands in the indentations on the left and right sides
as shown.
Warning: This product is heavy and requires two people to move it.
8. Place the product in its original packing materials, if possible, or use equivalent materials with
cushioning around the product. Make sure the box adequately protects the product control panel.
9. After transporting the product, remove the plastic protective piece from the print head, connect the
power cable, and turn on the product.
10. Run a print head nozzle check and clean the print head, if necessary.
Parent topic: Maintenance and Transportation
Related concepts
Print Head Nozzle Check
Print Head Cleaning
To Next Page
Loading...
