57
4. Do one of the following:
• If you want to move the paper into a different cutting position, press and hold the or icon
until the cut location reaches the cutting position labeled on the printer, and then select Cut.
• If you don't need to reposition the paper, select Cut to cut the paper with the built-in cutter.
Note: The minimum length of paper you can cut with the built-in cutter is 3.15 in. (80 mm) or 5 inches
(127 mm), depending on the paper type. These minimum lengths cannot be changed. Paper is
automatically fed if the length is shorter than the minimum. Cut any excess paper by hand, as
necessary.
To Next Page
Loading...
