61
Note:
• Do not load the following paper types in the paper cassette. Instead, feed and print these types of
paper as Cut Sheet or Poster Board:
• Epson Legacy Baryta II, Epson Legacy Platine, Epson Legacy Fibre, Epson Legacy Etching, or
Epson Legacy Textured
• Epson Exhibition Fiber Paper or Epson Exhibition Canvas Matte
• Epson Hot Press Bright or Epson Hot Press Natural
• Epson Cold Press Bright or Epson Cold Press Natural
• Epson Velvet Fine Art Paper
• Epson UltraSmooth Fine Art Paper
• Epson Watercolor Paper Radiant White
• We recommend refilling the paper cassette once paper has completely run out, rather than adding on
top of paper already in the cassette.
• If the paper eject support is raised, lower it before printing.
• The output tray can hold up to 50 cut sheets when printing on paper from the paper cassette.
However, when a paper's maximum number of sheets that can be loaded in the paper cassette is less
than 50, the maximum number of sheets the output tray can hold is the same as the number of sheets
in the paper cassette. Do not allow more than 50 cut sheets to stack up on the output tray and do not
mix roll paper and cut sheets on the output tray.
1. Make sure the printer is turned on.
2. On the control panel, select Menu > Paper Setting.
3. Select Paper Cassette and then select How To Load.
4. Follow the on-screen instructions to load the paper and then select the paper settings.
Note:
• The paper capacity is approximately 250 sheets of plain paper (depending on the paper thickness)
or 100 sheets of Epson Ultra Premium Photo Paper Luster.
To Next Page
Loading...
