75
Setting Description
Paper Thickness Set the thickness of the paper
Platen Gap Set the distance between the print head and the
paper; choose a wider setting if prints are
frequently scratched or smudged
Margins Select the margin for the leading edge of the
printed image. Depending on the paper type and
printing environment, colors may be uneven near
the leading edge if the margin is small.
Paper Suction Select to adjust the printer's suction setting;
choose lower values for thinner papers
Roll Tension Adjust the roll tension setting if paper gets wrinkled
during printing
Drying Time Set the drying time for each print head pass or for
each page
Paper Size Check Select On to automatically detect the paper width
when paper is loaded.
Select Off when the paper roll is empty. This
allows you to set the paper width before feeding
the paper.
Auto Cut Select Follow Paper Source Settings to follow
the cut settings in Printer Settings > Paper
Source Settings > Roll Paper Setup > Cut
Settings.
Select Never Cut to cut paper manually.
Skew Reduction Turn this off if the front edge of thin paper or softer
paper folds
Roll Core Diameter Select the paper core size for the loaded roll paper
To Next Page
Loading...
