Setup and Maintenance
91
B
Select the head where clogged nozzles were detected, and then click Normal or Powerful.
To clean all of the print head units, check All.
The color changes to gray for the heads that have been cleaned.
C
Check the results after cleaning.
Go back to step , and then use Detect Clogging to check the status of the nozzles.
If any nozzles are clogged, carry out the operation in step to clean the nozzles.
Function Explanation
Normal Cleans the surface of the head, and clears clogged nozzles.
Powerful Cleans more powerfully if the results of Detect Clogging are still red or nozzles are still clogged
after repeating head cleaning several times. Because Powerful consumes more ink compared to
Normal, prepare new ink cartridges before performing cleaning if ink levels are low.
To Next Page
Loading...
Need help?
General