Epson SureLab D700 - Page 72

Troubleshooting
72
W-2101 to
W-2104
Parts have reached the end of their service life.
xxxxxx
Do you want to continue using the printer or replace parts?
If you continue to use the printer, ink could leak or a
malfunction could occur.
Do you want to continue?
Contact Epson support.
W-2401 Maintenance cartridge not installed
Install the maintenance cartridge(xxxx).
Replace the maintenance tank.
See “Replacing the Maintenance
Tank” on page 51.
W-2402 Maintenance cartridge usage exceeded the application limit.
Replace the maintenance cartridge(xxxx).
Replace the maintenance tank.
See “Replacing the Maintenance
Tank” on page 51.
W-2201 Ink cartridge error
(xxxx)
Please install correct cartridge.
Epson recommends the genuine Epson cartridges listed above.
Replace the ink cartridges indicated.
See “Replacing Ink Cartridges” on
page 43.
W-2202 Replace Cartridge
(xxxx)
Epson recommends the genuine Epson cartridges listed above.
Replace the ink cartridges indicated.
See “Replacing Ink Cartridges” on
page 43.
W-2203 Ink cartridge error
(xxxx)
Remove and reinstall them correctly or replace them.
Epson recommends the genuine Epson cartridges listed above.
Make sure that the ink cartridge is
installed correctly. If it is installed
correctly, you need to replace the ink
cartridge.
See “Replacing Ink Cartridges” on
page 43.
W-2204 Ink cartridge error
(xxxx)
Please install correct cartridge.
Epson recommends the genuine Epson cartridges listed above.
Replace the ink cartridges indicated.
See “Replacing Ink Cartridges” on
page 43.
W-2205 Insufficient ink left to perform head cleaning or initial charge.
Replace the ink cartridge indicated by the ink light that is
turned on.
The cartridge being used can be installed again for printing.
Replace the ink cartridges indicated.
See “Replacing Ink Cartridges” on
page 43.
W-2403 Maintenance cartridge cannot be recognized
Install the maintenance cartridge correctly.
Make sure that the maintenance tank
is installed correctly. If it is installed
correctly, you need to replace the
maintenance tank.
See “Replacing the Maintenance
Tank” on page 51.
W-2404 Insufficient free space in the maintenance cartridge.
Replace the maintenance cartridge(xxxx), and then perform
head cleaning or initial charge.
When you have finished operations, close the [Maintenance
Tool].
Replace the maintenance tank.
See “Replacing the Maintenance
Tank” on page 51.
Code Message What to do