Troubleshooting
74
I-2307 Cannot perform [Detect Clogging] correctly.
Room temperature may not be within the guaranteed
operating range.
Check the room temperature.
Check the temperature. Use the
printer within the recommended
operating temperature range.
W-2311 Clogged nozzle(s) detected.
Delete all print jobs remaining in the operating sytem’s print
queue.
Start [Maintenance tool], select [Head maintenance] and
perform [Diagnostic Cleaning].
When you have finished operations, close the [Maintenance
Tool].
Perform Diagnostic Cleaning in the
Maintenance Tool.
See the "Maintenance Tool Operation
Guide" for more details on the
Maintenance Tool.
I-2401 Replace the maintenance cartridge soon
Prepare a new maintenance cartridge(xxxx).
You may continue printing until replacement of the
maintenance cartridge is required.
Check the message, and then click OK.
Prepare a new maintenance tank and
replace the old tank when prompted.
See “Replacing the Maintenance
Tank” on page 51.
W-2201 Ink cartridge error
(xxxx)
Please install correct cartridge.
Epson recommends the genuine Epson cartridges listed above.
Replace the ink cartridges indicated.
See “Replacing Ink Cartridges” on
page 43.
I-2101 to I-2104 It is nearly time to replace parts.
xxxxxx
Contact a technical representative.
You cannot print if parts have reached the end of their service
life.
Contact Epson support.
W-1301 The scrap paper box has come off.
Delete all print jobs remaining in the operating sytem’s print
queue.
Install the scrap paper box correctly.
Attach the scrap paper box.
W-1302 Cartridge cover (right) open.
Delete all print jobs remaining in the operating sytem’s print
queue.
When replacing a cartridge, check the location and the
cartridge type.
Close the cartridge cover.
Close the cartridge cover (right).
W-1303 Cartridge cover (left) open.
Delete all print jobs remaining in the operating sytem’s print
queue.
When replacing a cartridge, check the location and the
cartridge type.
Close the cartridge cover.
Close the cartridge cover (left).
W-1304 Top cover open.
Delete all print jobs remaining in the operating sytem’s print
queue.
Close the top cover.
Close the top cover.
Code Message What to do
To Next Page
Loading...
