APPENDIX B Connectors
1
. Connectors
-cl
Interface
connector
connector
connector
2.
Interface connectors
Refer to APPENDIX C Interfaces
3. Power supply connector
This connector is used to connect an external power source.
(1) Pin assignment: Refer to Table
(2) Model
Hosiden TCS7960-53-2010
Power Supply
(3) The other side: Hosiden TCS7960-53-2010 COIIIWCW tin ASSQI~
Pin Number] Function
I 1
+24 VDCI
4.
Drawer - kick connector (modular connector)
A pulse specified by ESC p command will be output to this
The status of input signal is informed to the host computer
command.
(11 Pin assianment
\ I
LI
Pin Number
Signal Name Direction
1
Frame GND
-
1
----------__--_-------------------------------------------
------------ 2 LDrawer --------------------------- kick~out-drivesi~~~i[ ---
------_
------ Outs
But
-----
L
3 _ IDrawer open/close sign@ _____ ]- Input
-------- -- ---------- ------_____
-me ----w--
I 4 I +24 \
~~ /DC
-
------s---m --------------------------------------------~
5
N.C
-
----------------------------------------------------------
6
Signal GND
-
connector.
by ESC u
-5o-