Handling Paper
!CAUTION:
❏
Be sure to use the specified paper. (
U
"Specifications" on page 31)
❏
Do not insert any paper that has clips or staples. This may cause paper jams and damage.
❏
Make sure the slip/validation paper is flat and without curls, folds, or wrinkles.
Installing and Replacing the Roll Paper
Follow the steps below to install/replace the roll paper.
1. Make sure the printer is turned on.
2. Open the roll paper cover.
3. Remove the used roll paper core, if there is one, and insert the roll paper in the correct direction.
To Next Page
Loading...
