Connecting the Cables
! CAUTION:
When using USB Plus Power interface, be careful of the following points. The printer may malfunction.
❏
Do not connect an AC adapter.
❏
Do not remove or insert the USB Plus Power cable while the printer is still on.
Q
Notes:
Available interfaces vary depending on the printer model.
1. Make sure the power switch is off.
2. Connect each interface cable to the printer. When using the USB interface, fix the USB cable with the
locking wire saddle to prevent the USB cable from coming off.
3. Connect the interface cable to the computer.
4. Connect the AC cable connector to the AC port of the AC adapter.
To Next Page
Loading...
