Specifications
Mbps: megabits per second
*1: Factory installed options
*2: The available interfaces vary depending on the printer model.
*3: Be sure to use a safety-standards-applied power source that meets the following specifications.
Rated output: 2.1 - 10.0 A, Maximum output: 240 VA or less
Printing method Receipt
Thermal line
Slip/Endorsement
*1
9-pin serial impact dot matrix
Paper dimensions Receipt
79.5 ± 0.5 × 83 mm {3.1 ± 0.02 × 3.3"}
Slip
68 to 230 × 68 to 297 mm {2.68 to 9.06 × 2.68 to 11.7"} (W × L)
Minimum size: 68 × 152 mm {2.68 × 5.98"}
Paper thickness
Slip (single ply): 0.09 to 0.22 mm {0.0035 to 0.0087"}
Inked ribbon Slip
ERC-32
Endorsement
*1
ERC-43
Interface
*2
Serial
RS-232
Ethernet
10BASE-T/100BASE-TX
USB
USB 2.0, Full-speed (12 Mbps)
USB Plus Power
Full-speed (12 Mbps)
Wireless LAN
Connect the Epson certified unit to the USB connector.
Supply voltage
*3
DC + 24 V ± 7%
Current consumption
Mean: Approximately 1.8 A
Temp erature
Operating: 5 to 45°C {41 to 113°F}
Storage: –10 to 50°C {14 to 122°F}, except for paper
Humidity
Operating: 10 to 90% RH
Storage: 10 to 90% RH, except for paper
Elevation
3,000 m or less
Overall dimensions
181 × 186 × 278 mm {7.13 × 7.32 × 10.94"} (H × W × D)
Weight (mass)
Approx. 4.4 kg {9.7 lb}
To Next Page
Loading...
