TM-P20II User's Manual CHAP03.FM (A4 size) Rev.A
Basic Operations
21
How to Charge the Battery
!
CAUTION:
O When charging the battery, install the battery to the printer.
O Charge the battery in an environment of approximately 0 to 40
°
C (32 to 104
°
F).
Note:
O When the printer is used for the first time, the battery needs to be charged for approximately 3 hours.
O When the printer is used for the first time, the battery needs to be charged for approximately 2.5 hours.
O When the printer is used for the first time, the battery needs to be charged for approximately 2.5 hours.
O Use a USB power adapter or USB port that complies with the USB standard.
O Only USB Type-C standard power mode is supported. The charging time varies depending on the power supply
capability and settings of the USB power adapter and port.
"USB charging" on page 52
A
Connect the included USB cable to the printer.
B
Connect the USB cable to a commercially available USB power adapter or computer.
C
The charge LED lights up when charging starts.
If the remaining battery charge is almost full, charging will not start.
Check the battery LED for remaining battery charge.
"Battery LED" on page 23
D
The charge LED turns off when charging is complete.
To Next Page
Loading...
Need help?
General