TM-P20II User's Manual CHAP03.FM (A4 size) Rev.A
Basic Operations
24
Wireless Charging
The battery can be charged using a commercially available wireless charger that supports the Qi standard.
Place the printer so that the symbol on the printer overlaps the position indicated in the wireless charger
manual.
The charge LED lights up when charging starts. If the charge LED does not light up, reposition the printer in the
correct position.
Check the battery LED for charge level.
"Battery LED" on page 23
Precautions for Wireless Charging
O For the procedure of wireless charging, refer to the manual of the wireless charger.
O Remove the belt clip when charging wirelessly.
"Placing the Printer on a Flat Surface" on page 15
O When charging wirelessly, remove the optional belt strap, shoulder strap, and soft case.
O When charging, be sure to correctly align the printer's wireless charging position with that of the wireless
charger.
O Be careful not to allow foreign objects to get between the printer and the wireless charger. Foreign objects may
generate heat or cause damages, resulting in improper charging.
O Disconnect the USB cable when charging wirelessly. Wireless charging will not work if the printer is connected
to a computer or other device.
O The charging time with wireless charging is as follows.
3 to 6 hours (depending on the specifications of your wireless charger)
To Next Page
Loading...
Need help?
General