TM-P20II User's Manual CHAP05.FM (A4 size) Rev.A
Cleaning
41
Cleaning the Platen Roller and Paper Detector
Depending on the roll paper used, paper dust may stick to the platen roller and the paper may not be fed correctly.
Follow the procedure below to remove the paper dust.
To maintain receipt print quality, we recommends cleaning the platen roller and the paper detector periodically
(about once every 3 months).
A
Turn off the printer.
B
Disconnect the USB cable, if it is connected.
C
Open the roll paper cover and then remove roll paper.
D
Use a cotton swab lightly moistened with water to remove paper dust from the platen roller and paper
detector.
A
B
A
B