TM-P20II User's Manual CHAP03.FM (A4 size) Rev.A
Basic Operations
30
Installing or Replacing the Roll Paper
Follow the steps below to install or replace the roll paper.
!
CAUTION:
O Be careful not to touch the manual cutter when installing or removing the roll paper. The manual cutter may
injure your hand.
O Be careful not to touch the manual cutter when installing or removing the roll paper. The manual cutter may
injure your hand.
O Make sure you use a specified roll paper type.
O Before installing the roll paper, take up any slack in the roll paper by pulling its leading edge. If you install a slack
roll paper, a paper jam or print quality problems may occur.
O Before installing the roll paper, make sure that the roll paper is not deformed. Using a deformed roll paper will
cause the printer to malfunction.
A
Open the roll paper cover.
"How to Open the Roll Paper Cover" on page 27
B
Remove the used roll paper core if any.
C
Install the roll paper in the correct direction.
To Next Page
Loading...
