Epson TM-T70 II User Manual

20
3
Click [TCP/IP] under “Configuration”.
4
The “TCP/IP Setting” screen appears. Configure the network settings. When finished, click
the [SUBMIT] button.
•Get IP Address: Select [Manual].
•Set using Automatic Private IP Addressing (APIPA):
Select [Disable].
•Set using PING: Select [Enable].
•IP Address: Set the IP Address.
•Subnet Mask: Set the Subnet Mask.
•Default Gateway: Set the Default Gateway.

Epson TM-T70 II Specifications

General

Print Method	Thermal line printing
Print Speed	250 mm/sec
Weight	1.8 kg
Auto Cutter	Yes
Paper Roll Diameter	83 mm
Paper Width	79.5 ±0.5 mm
Interface	USB, Serial, Ethernet
Dimensions	125‎ x 194 x 114 mm (Width x Depth x Height)
Operating Temperature	5 to 45 °C
Operating Humidity	10 - 90%