Epson TM-T70 II User Manual

21
Chapter 2 Installation
2
5
When the network settings of the printer are changed, the following screen appears.
6
Turn off the printer power and then turn it back on.
7
In the address bar of your Web browser, enter the IP address that you set. If TMNet
WebConfig starts, the procedure is finished.
If TMNet WebConfig does not start, check if the printer is connected to the network. Print the status sheet
again and check the IP address if necessary.
This completes the procedure for configuring the network settings of the printer.

Epson TM-T70 II Specifications

General

Print Method	Thermal line printing
Print Speed	250 mm/sec
Weight	1.8 kg
Auto Cutter	Yes
Paper Roll Diameter	83 mm
Paper Width	79.5 ±0.5 mm
Interface	USB, Serial, Ethernet
Dimensions	125‎ x 194 x 114 mm (Width x Depth x Height)
Operating Temperature	5 to 45 °C
Operating Humidity	10 - 90%