37
Chapter 3 Programming Guide
3
Printer Status List
Printer Status Cause
Print.ST_NO_RESPONSE
(0x00000001)
No response from the printer
Print.ST_PRINT_SUCCESS
(0x00000002)
Printing is successfully completed
Print.ST_DRAWER_KICK
(0x00000004)
Status of the 3rd pin of the drawer kick-out connector = "H"
Print.ST_OFF_LINE
0x00000008)
Offline
Print.ST_COVER_OPEN
(0x00000020)
The cover is open
Print.ST_PAPER_FEED
(0x00000040)
Paper is being fed by a paper feed switch operation
Print.ST_WAIT_ON_LINE
(0x00000100)
Waiting to be brought back online
Print.ST_PANEL_SWITCH
(0x00000200)
The paper feed switch is being pressed (ON)
Print.ST_MECHANICAL_ERR
(0x00000400)
A mechanical error occurred
Print.ST_AUTOCUTTER_ERR
(0x00000800)
An autocutter error occurred
Print.ST_UNRECOVER_ERR
(0x00002000)
An unrecoverable error occurred
Print.ST_AUTORECOVER_ERR
(0x00004000)
An automatically recoverable error occurred
Print.ST_RECEIPT_NEAR_END
(0x00020000)
No paper in roll paper near end sensor
Print.ST_RECEIPT_END
(0x00080000)
No paper in roll paper end sensor
Print.ST_BUZZER
(0x01000000)
A buzzer is on (only for applicable devices)