Epson TM T88V - Print class; EposException class

40
Print class
Controls the printer by sending a print document created using the Builder class, and monitors the
transmission result and the communication status.
EposException class
When an exception caused by an API execution error or print error occurs and is thrown, acquires the error
status and the printer status.
Pagemode
addPageBegin Adds a tag for switching to page mode. 70
addPageEnd Adds a tag for finishing page mode. 71
addPageArea
Adds a tag for specifying the print area in
page mode.
72
addPageDirection
Adds a tag for specifying the print direction in
page mode.
74
addPagePosition
Adds a tag for specifying the print position in
page mode.
76
addPageLine Adds a tag for drawing a line in page mode. 78
addPageRectangle
Adds a tag for drawing a rectangle in page
mode.
80
Cut addCut Adds a tag for paper cut. 82
Drawer kick-out addPulse Adds a tag for the drawer kick-out. 83
Buzzer addSound Adds a tag for turning on the buzzer. 84
Send Command addCommand Adds a tag for inserting commands. 86
API Description Page
Constructor Initialize a Print class instance. 87
openPrinter Start communication with the printer. 88
closePrinter End communication with the printer. 90
sendData Sends a command to the printer. 91
API Description Page
getErrorStatus Acquires the error status. 91
getPrinterStatus Acquires the printer status. 91
API Description Page