How to fix Epson Printer Recovery Mode?
If your Epson Printer is in Recovery Mode, it indicates that the firmware update has failed. You will need to re-attempt the firmware update. Prepare a USB cable and visit your local Epson website for further instructions.
What to do if my Epson All in One Printer has a paper jam error?
If your Epson All in One Printer displays a paper jam error, turn the printer off and then back on. Make sure that no paper is still inside the printer. If the error message continues to appear, contact Epson support.
What to do if my Epson All in One Printer has a scanner error?
If your Epson All in One Printer displays a scanner error, turn the product off and then back on. If the error message continues to appear, contact Epson support.
What to do if my Epson WF-2510 says its ink pad is nearing the end of its service life?
If your Epson Printer displays a message indicating that the ink pad is nearing the end of its service life, you can press the x button to resume printing temporarily. However, this message will continue to appear until the ink pad is replaced. It is recommended to contact Epson support to replace the ink pads before they reach the end of their service life. Be aware that when the ink pads become saturated, the printer will stop functioning, and Epson support will be required to continue printing.
What to do if my Epson WF-2510 displays a communication error?
If your Epson Printer displays a communication error, ensure that the computer is correctly connected to the printer. If the error persists, verify that the scanning software is installed on your computer and that all software settings are properly configured.
What to do if my Epson WF-2510 Printer displays a printer error?
If your Epson Printer displays a printer error, turn the printer off and then back on. Ensure that no paper remains inside the printer. If the error message continues to appear after restarting, it is recommended to contact Epson support for further assistance.
What to do if my Epson Printer says its ink pad is at the end of its service life?
If your Epson Printer displays a message indicating that the ink pad is at the end of its service life, you should contact Epson support to arrange for the replacement of the ink pads.
What to do if my Epson WF-2510 Printer says cannot recognize USB device?
If your Epson Printer displays cannot recognize USB device, make sure the USB device has been inserted correctly.
What to do if my Epson Printer displays cannot recognize the device?
If your Epson Printer displays cannot recognize the device, make sure the storage disk has been inserted correctly.
What to do if my Epson WF-2510 has no dial tone detected?
If your Epson Printer displays 'No dial tone detected', ensure the phone cable is correctly connected and the phone line is working. If you're connected to a PBX phone line or Terminal Adapter, turn off Dial Tone Detection by pressing K and then x, then selecting Fax Settings > Communication > Dial Tone Detection.
General| Print Technology | Inkjet |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Resolution | 5760 x 1440 dpi |
| Print Speed (Black) | 34 ppm |
| Print Speed (Color) | 18 ppm |
| Scanner Type | Flatbed |
| Maximum Scan Resolution | 1200 x 2400 dpi |
| Fax Speed | 33.6 Kbps |
| Mobile Printing | Epson Connect, Apple AirPrint, Google Cloud Print |
| Input Capacity | 100 sheets |
| Display | 2-line LCD |
| Ink Colors | Cyan, Magenta, Yellow, Black |
| Weight | 5.8 kg |
| Duplex Printing | Manual |
| Connectivity | USB, WiFi |
| Paper Sizes | A4, A5, B5 |
| Ink Type | Dye-based ink |
To Next Page
