Epson WF-2510 Basic Guide

Error Messages Solutions
No dial tone.
Fax job incomplete.
Make sure the phone cable is connected correctly and the phone
line works.
& “Connecting to a Phone Line” on page 10
If you connected the product to a PBX (Private Branch Exchange)
phone line or Terminal Adapter, turn off the Dial Tone
Detection.
& Press K and then x. Then select Fax Settings >
Communication > Dial Tone Detection.
Recovery Mode The firmware update has failed. You will need to re-attempt the
firmware update. Ready a USB cable and visit your local Epson
website for further instructions.
Paper Jams
!
Caution:
Never touch the buttons on the control panel while
your hand is inside the product.
Note:
❏ Cancel the print job if prompted by a message from
the LCD screen or the printer driver.
❏ After you have removed the jammed paper, press the
button indicated in the LCD screen.
Removing jammed paper from
inside the product
A
Open the scanner unit.
c
Important:
Do not lift up the scanner unit when the document
cover is open.
B
Remove all of the paper inside, including any
torn pieces.
C
Close the scanner unit slowly.
Basic Guide
Basic Troubleshooting
18

Epson WF-2510 Specifications

General

Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Print Resolution	5760 x 1440 dpi
Print Speed (Black)	34 ppm
Print Speed (Color)	18 ppm
Scanner Type	Flatbed
Maximum Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Input Capacity	100 sheets
Display	2-line LCD
Ink Colors	Cyan, Magenta, Yellow, Black
Weight	5.8 kg
Duplex Printing	Manual
Connectivity	USB, WiFi
Paper Sizes	A4, A5, B5
Ink Type	Dye-based ink