Epson WF-2530 Quick Guide

Maintaining Your Product 21
Maintaining Your Product
Follow the instructions in this chapter to check and clean the print head nozzles, check ink
levels, and replace ink cartridges. If you need to align the print head, see the online
User’s Guide.
Caution: To keep your product looking like new, don’t place anything on top of the
cover or use it as a writing surface. If you need to clean the cover, use only a soft, non-
abrasive microfiber-type cloth.
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the nozzles in the print head may
be clogged or ink may be running low in one or more of the ink cartridges. Follow the
steps below to check the print head nozzles.
1. Load a few sheets of letter- or A4-size paper in the sheet feeder.
2. Press the x
Menu button.
3. Press u or d to select
Maintenance, then press OK.
4. Press u or d to select
Nozzle Check, then press the Color x Start button.
5. Check the nozzle check pattern that prints to see if there are gaps in the lines.
6. If there are no gaps, the print head is clean. Press
1 to select Finish.
If there are gaps or the pattern is faint, press
2 to select Head Cleaning and clean the
print head (see page 22).
Nozzles are clean Nozzles need cleaning

Epson WF-2530 Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Scan Resolution	1200 x 2400 dpi
Fax Capability	Yes
Fax Speed	33.6 Kbps
ADF Capacity	30 sheets
Paper Handling Input	100 sheets
Wireless	Yes
Ink Colors	Cyan, Magenta, Yellow, Black
Print Speed (Black)	9 ppm (ISO)
Print Speed (Color)	4.7 ppm (ISO)
Copy Speed (Black)	7 cpm
Copy Speed (Color)	3.8 cpm
Scanner Type	Flatbed
Paper Sizes	Letter, Legal, A4, A5, B5, envelopes
Connectivity	USB, Ethernet
Mobile Printing	Epson Connect
Display	2.5-inch LCD