Epson WF-2530 Quick Guide

24 Replacing Ink Cartridges
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Leave the expended cartridge installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
1. Turn on the product.
2. If an ink cartridge is expended, you see a message on the
LCD screen indicating which color to replace. Note which
cartridges need to be replaced and press
OK.
If you’re replacing a cartridge before you see a message on the LCD screen, press the
x
Menu button, press u or d to select Maintenance, press u or d to select Ink
Cartridge Replacement
, then press OK.
3. Lift up the scanner unit.
Caution: Do not touch the flat white cable inside the product.
4. Squeeze the tab on the cartridge and lift it up. Dispose of it carefully. Do not take the
used cartridge apart or try to refill it.
Warning: If ink gets on your skin, wash it off with soap and water. If ink gets into
your eyes, flush them immediately with water. If ink gets in your mouth, spit it out
and see a doctor right away.

Epson WF-2530 Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Scan Resolution	1200 x 2400 dpi
Fax Capability	Yes
Fax Speed	33.6 Kbps
ADF Capacity	30 sheets
Paper Handling Input	100 sheets
Wireless	Yes
Ink Colors	Cyan, Magenta, Yellow, Black
Print Speed (Black)	9 ppm (ISO)
Print Speed (Color)	4.7 ppm (ISO)
Copy Speed (Black)	7 cpm
Copy Speed (Color)	3.8 cpm
Scanner Type	Flatbed
Paper Sizes	Letter, Legal, A4, A5, B5, envelopes
Connectivity	USB, Ethernet
Mobile Printing	Epson Connect
Display	2.5-inch LCD