8 Copying a Photo or Document
Copying a Photo or Document
Follow the steps in this section to copy black-and-white or color documents.
If you use the Automatic Document Feeder (ADF), you can copy up to 30 sheets of letter-
or A4-size paper or 10 sheets of legal-size paper at a time. Load only plain paper in the
ADF.
1. Load paper in the sheet feeder.
2. Place your original document on the scanner glass, or load your documents in the
ADF (see page 6).
3. Press the r
Copy button.
4. Press u or d or use the numeric keypad to select the number of copies you want (up
to 99).
5. To change the layout, press x
Menu, then press OK.
6. Press u or d to select
With Border to leave a small margin around the image or
Borderless (when copying photos onto photo paper) to expand the image all the way
to the edge of the paper (slight cropping may occur). Then press
OK.
7. To change paper type, paper size, or any other print settings, press u or d to select the
setting, then press
OK. Press u or d to select an option, then press OK.
Note: Not all Paper Type, Paper Size, Layout, and Quality settings may be available
depending on the options you choose. See the online User’s Guide for details.
To clear copy settings, press
y Stop/Reset.
8. After you finish selecting settings, press x Menu to exit the settings menu.
9. Press the
B&W or Color x Start button to begin copying. To cancel copying, press
y
Stop/Reset.
To Next Page
Loading...
Need help?
General
