Epson WF-2830 - Checking the Nozzles Using the Product Control Panel

200
Checking the Nozzles Using a Computer Utility
Parent topic: Print Head Maintenance
Checking the Nozzles Using the Product Control Panel
You can check the print head nozzles using the control panel on your product.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the home button, if necessary.
4. Select Maintenance > Nozzle Check.
You see a screen like this:
5. Press the start button to print.
The nozzle pattern prints.