42
• For Android devices, select Android. Open the Epson iPrint app on your device and select your
product. Press the down arrow button to scroll down and display the product information. Press
the OK button to return to the home screen.
• For other types of devices, select Other OS Devices. Press the down arrow button to scroll down
and display the product information. On your device, select the Wi-Fi network name (SSID)
displayed on the LCD screen and enter the password shown. Press the OK button to return to the
home screen.
The Wi-Fi Direct icon is displayed on the LCD screen and indicates if Wi-Fi Direct is enabled
on the product.
Parent topic: Wi-Fi Direct Mode Setup
Related references
Status Icon Information
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the home button, if necessary.
2. Select Wi-Fi Setup.
To Next Page
Loading...
