39
7. Enter your wireless password.
Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and
lowercase letters, and numeric or special characters.
8. Select OK when you finish entering your password.
9. If you want to print a network setup report, press the start button. (Otherwise, press the cancel
button.)
10. Press the home button to exit, if necessary.
You see the icon on the LCD screen and should be able to connect to your product directly from
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software as described on the Start Here sheet.
Parent topic: Wi-Fi Infrastructure Mode Setup
Related references
Status Icon Information
Entering Characters on the LCD Screen
To Next Page
Loading...
