155
Setting the Number of Rings to Answer
Selecting the Line Type
If you connect the product to a PBX phone system or terminal adapter, you must change the product's
line type. PBX (Private Branch Exchange) is used in office environments where an external access code
such as “9” must be dialed to call an outside line. The default Line Type setting is PSTN (Public Switched
Telephone Network), which is a standard home phone line.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Fax Settings > Basic Settings > Line Type > PBX.
You see a screen like this:
3. Set the switch to Use to activate the setting.
4. Select Access Code.
5. Use the displayed keypad to enter the access code, such as 9, and select OK.
Parent topic: Setting Up Basic Fax Features
Related references
Basic Settings - Fax
Setting the Number of Rings to Answer
If you connect an external answering machine and select to receive faxes automatically, make sure the
Rings to Answer setting is correct. The number of rings should be higher than the number of rings your
answering machine is set to for answering a call.
To Next Page
Loading...
