Epson WF-2950 - Sending a Fax Using the Keypad, Contact List, or History

184
Parent topic: Sending Faxes
Related tasks
Selecting the Line Type
Related topics
Placing Originals on the Product
Setting Up Contacts Using the Product Control Panel
Sending a Fax Using the Keypad, Contact List, or History
You can send a fax from your product control panel by entering the fax number, or selecting the number
from either the contact list or fax history.
Note: You can send a black-and-white fax to up to 100 contacts or 99 groups at a time, or send a color
fax to one recipient at a time. If your recipient's fax machine does not print in color, your fax is
automatically sent in black-and-white.
1. Place your original on the product for faxing.
2. Press the home button, if necessary.
3. Select Fax.
4. Do one of the following to select fax recipients:
• Manually enter a fax number: Select Keypad and enter a fax number. Select OK when done. To
add another fax number, repeat the same steps. You can also use the numeric keypad on the
control panel to enter a fax number.
Note: If direct dialing has been restricted, you can only select the number from the contact list or
fax history. If necessary, enter an outside line access code (such as 9) at the beginning of the fax
number. If the access code has been set up in the Line Type setting, enter the # pound sign
instead of the code. If your fax number requires a brief pause, select - to insert a pause symbol
(–).
• Select from the contact list: Select Contacts to display the contact list. Select one or more
contacts (select the contact again to deselect it). You can also select the Search for Contacts
field to search for recipients by name, index name, or entry number. Select Close when you are
finished.