187
Note: Make sure the product's date and time settings are correct. You can only send faxes in black-and-
white when you use this option.
1. Place your original on the product for faxing.
2. Press the home button, if necessary.
3. Select Fax.
4. Enter a fax number or select a number from the Contacts or Recent lists.
5. Select Fax Settings.
6. Select Send Fax Later.
7. Select On.
8. Select Time, use the displayed keypad on the LCD screen to enter your desired time, and select
OK.
9. Select Done.
10. Press the start button to send the fax.
Note: To cancel faxing, press the cancel button.
After scanning your originals, your product dials the number and sends the fax at the specified time.
Note: You cannot send another fax until the fax has been sent at the specified time. If you want to send
a fax before then, cancel the scheduled fax by selecting Fax on the home screen and then deleting it. If
the product is turned off at the specified time, the fax is sent when it is powered on.
Parent topic: Sending Faxes from the Product Control Panel
Related tasks
Selecting the Date and Time
Related topics
Setting Up Contacts Using the Product Control Panel
Placing Originals on the Product
Dialing Fax Numbers from a Connected Telephone
If you connected a telephone to the EXT port on your product, you can send a fax by dialing the fax
number from the connected telephone. If the recipient's phone number and fax number are the same,
you can speak to the recipient before sending the fax.
To Next Page
Loading...
