Epson WF-2950 - Turning off the Operation Time out Setting

27
You see a screen like this:
3. Select Mute, Normal Mode or Quiet Mode.
Note: Select the icon on the home screen to switch between Normal Mode and Quiet
Mode.
4. If you selected Normal Mode or Quiet Mode, do the following:
• Select Button Press.
• Press the + or – buttons to decrease or increase the sound.
• Select Done to exit.
Parent topic: Using the Control Panel
Turning Off the Operation Time Out Setting
The Operation Time Out setting causes the LCD screen to return to the Home screen after a few minutes
of inactivity. This feature is enabled by default, but you can turn it off.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Basic Settings.