Epson WF-2950 User Manual

41
Selecting Wireless Network Settings from the Control Panel
You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install
the necessary software by downloading it from the Epson website. The installer program guides you
through network setup.
Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not
responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your network data and settings.
1. Press the home button, if necessary.
2. Select the icon.
You see a screen like this:
3. Select Wi-Fi (Recommended).
4. Select Start Setup or Change Settings.
5. Select Wi-Fi Setup Wizard.

Epson WF-2950 Specifications

General

Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Input Capacity	100 sheets
Scan Type	Flatbed
Scan Resolution	1200 x 2400 dpi
Print Resolution	5760 x 1440 dpi
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Connectivity	USB, Wi-Fi, Ethernet
Display	2.4" Color LCD
Mobile Printing	Epson Connect, Apple AirPrint
Fax Speed	33.6 Kbps
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Ink Cartridges	Black, Cyan, Magenta, Yellow