6. Remove only the yellow tape.
7. Insert the new cartridge into the holder and push it down until it clicks into place.
8. Close the cartridge cover and push it down until it clicks into place.
9. Close the printer cover and press the OK button to begin ink priming.
Note: Do not turn off the printer during ink priming.
Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the printer. The valve in the ink supply port is designed to contain
any excess ink, but do not touch the ink supply port or surrounding area. Always store ink cartridges with
the label facing up; do not store cartridges upside-down.
110
To Next Page
Loading...
