Epson WF-7110 - Setting a Password and Locking the Control Panel

Setting a Password and Locking the Control Panel
You can set an administrator password to lock the following control panel settings:
• System Administration Setup settings
• Eco mode settings
When the control panel is locked, you must enter the password to access any of the locked settings.
1. Press the up and down arrow buttons, select Menu, and press the OK button.
You see a screen like this:
2. Press the down arrow button, select Admin Settings, and press the OK button.
3. Select Admin Password and press the OK button.
4. Select Register and press the OK button.
You see a screen like this:
5. Use the control panel buttons to enter a password and press the OK button.
6. Enter your password again to confirm.
12