Epson WF-7110 - Cleaning the Print Head Using the Product Control Panel

Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1. Make sure plain paper is loaded in Cassette 1.
2. Press the up or down arrow buttons, select Menu, and press the OK button.
3. Press the down arrow button, select Maintenance, and press the OK button.
4. Press the down arrow button, select Print Head Cleaning, and press the OK button.
You see this screen:
5. Press the up arrow button.
You see a screen like this:
6. Press the up or down arrow button to select the cleaning cycle you want to run, and press the OK
button.
Note: Use the nozzle check pattern to determine which colors need cleaning. You can save ink by
cleaning only selected colors.
122