1. Turn off the product.
2. Lift up the printer cover.
3. Make sure the print head is in the home position on the right.
4. Secure the ink cartridge holder to the case with tape as shown.
5. Close the printer cover.
6. Remove all the paper from the product.
7. Unplug the power cable.
8. Disconnect any connected cables.
9. Close the rear paper feed slot and output tray.
10. Place the product in its original packing materials, if possible, or use equivalent materials with
cushioning around the product. Make sure the box adequately protects the product control panel.
Keep the product level during transportation. If print quality has declined when you print again, clean and
align the print head.
Parent topic: Cleaning and Transporting Your Product
Related concepts
Print Head Alignment
Print Head Cleaning
130
To Next Page
Loading...
