Epson WF-7525 - Page 28

Operating Principles Power-On Sequence 28
Epson WF-7520/7510/7010 series Revision A
Note *1: “Paper exists” is detected when the carriage touches the paper. When “paper does not exist” is detected, the power-on sequence
of condition 1 (
Table 2-6) is executed from No.6.
*2: If the paper jam error cannot be solved after repeating the power-on sequence on condition 2 (
Table 2-7) twice, the printer turns
into the paper jam fatal error for the third time.
Table 2-7. Condition 2: Power-on Sequence after Recovering from a Paper Jam Error
Operation
Carriage/PF Roller
movement and
position
Executes No.1 to No.5 on the normal power-on sequence (Table 2-6).
6. Detecting remaining paper
6-1.The carriage moves to the 130-digit side and confirms there is no paper.
*1
6-2.The carriage quickly returns to its home position, and the paper jam error occurs again.
When the user removes the paper and releases the paper jam error by panel operation, the normal power-on sequence from No.1 (Table 2-6) is executed
again.
*2
130
130