Troubleshooting 43
Epson WF-7520/7510/7010 series Revision A
Cannot print all the
received data when
printing data stored in
memory
The size of the memory is 2.0
Mbyte. If the data becomes over
the set threshold, oldest data are
deleted to make room for new
ones.
Ask the sender to resend the data if necessary because the data
deleted from the memory can not be restored.
Images run off the paper
Auto reduction is set to off. Set auto reduction to on and reprint the data.
Paper size setting does not match
the size of the received data.
Choose the correct setting and reprint the data.
Paper size setting does not match
the size of papers in the tray.
Choose the correct setting or load correct sized papers in the tray and
reprint the data.
Table 3-8. Troubleshooting Based on the Error Code/Superficial Phenomenon
Error code (LCD
Message)/Phenomenon
Description Remedy
To Next Page
Loading...
